Description:
RX-ALF3528-30 Large-size LED Module waterproof LED aluminum panel, With the top SMD LED, unique waterproof design, the world's first, holds several patents, has a slim, low temperature rise, waterproof, safe, reliable, long life; strength over 80,000 hours aging test; Around the world, more than 9 years practical application, to good effect. Mainly used for light boxes backlight, a variety of power, in various sizes, you can also customize the size, the professional energy-saving lighting project, Yachts, airships, large equipment light source
| 1. Large-size waterproof LED module 2. No additional heat sink is required 3. Can customize size you need, maximum 0.9x0.9m 4. Patent number: ZL200820131053, ZL200820132702 5. lighting fixtures Light source, advanced advertising backlight 6. Input voltage DC12V (Optional: DC24V) 7. LED chip luminous efficiency: 180Lm / W 8. CE RoHS FCC
|
Model | Dimension LED QTY | Color temperature | Illuminance Lx | Luminous flux Radiation Power | Power Test Input DC12V | Comment |
RX-ALF3528-30 | 466x342x3mm 192LED
| 6000K | 35mm | 1577Lm | 12W | Beam angle 120° Min. Cabinet Depth* 48mm |
0.5m |
1m |
Surface temperature rise Tc 5°K, Operating temperature:-30℃~40℃, Lifespan:50,000 hours (Note: Ta 25℃) *Minimum distance required from Panel to face. Calculated with 2447 milky white acrylic with no graphics, Depth on faces with graphics can nave thinner cabinet depths, Consult with XineLam for samples and depth demonstrations. Special sizes, Consult with XineLam Reps and Distributors
|
The above data is for reference only!
l Dimension
l Optional plug wire
l Advertising light boxes backlight installation diagram
l Wiring diagram
A large area of simple synchronous dimming system - No PWM flicker
Constant voltage constant current power supply - 100% load power
DM-IR8A PWM dimmers, including infra-red remote control. CAUTION: This product is installed by a professional engineering staff.
Safety Information
1. The LED panel itself and all its components may not be mechanically stressed.
2. Assembly must not damage or destroy conducting paths on the circuit board.
3. Installation of LED lamp (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
4. Correct electrical polarity needs to be observed. Wrong polarity may destroy the LED panel.
5. Parallel connection is highly recommended as safe electrical operation mode.
6. Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the LED panel.
7. Please ensure that the power supply of adapters power to operate the total load.
8. When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
9. Pay attention to standard ESD precautions when installing the LED panel.
10. Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
11. Waterproof LED panel , please note waterproof wiring department
12. LED panel can’t be used as support, you need fixed in the frame, fixed to the wall, otherwise, may cause deformation.